| Restoration Process 1. First the kiosk is stripped out: all the remaining glass and fittings are removed until all that is left is a cast iron shell.
Prior to restoration |
2. This is then sand blasted back to bare metal so that it resembles the condition it was in when it first came out of the foundry.
Sand blasted |
3. After being de-greased, the K6 is then painted with 1 coat of red oxide primer followed by at least 3 coats of red enamel. Seventy-two panes of 6.5mm thick safety glass are used to re-glaze the kiosk, including the Push/Pull panel. Safety glass is also used for the four hand screen-printed TELEPHONE signs at the top of each box. |
